← Back to the Sprint

Case studies

30+ automations, measured in hours and dollars

What a vacation-rental operator automated across operations, guest services, compliance, finance, marketing, sales and HR, and what each one saves. Open any case for the problem, the fix and why it matters.

~430 hours
saved every week across 30+ automations
$2,250
a month in fines avoided across the compliance cases
30+
automations in production or pilot
9
departments covered

Department

25 of 25 shown

Case study 1

Every Pool Checked Before Check-In

Pools must be clean for every arrival across 77 pools; a green pool is one of the fastest routes to a complaint.

  • Operations
  • Compliance
Time saved25 minsaved per pool, per day
Fine exposure
$500
a day for a green pool
Before
30 min
per pool, per day
Now
5 min
per pool, per day
See the details
  • Knowing a pool's condition meant a site visit or a guest complaint.

    Every day at 1 PM, a camera snapshot labels each pool clean, dirty or covered.

  • No portfolio-wide view of which pools needed attention.

    One table, every property with its photo, posted to the pool team's Slack.

  • A green pool is a code violation: up to $500 a day.

    Problem pools flagged before afternoon check-ins.

  • Nobody knew which pools even had a usable camera.

    Pools without a camera are listed too: a ready-made install list.

The result

~270 hours weekly before → ~40 hours weekly now, across 77 pools

  • Saves ~230 hours every week across 77 pools.
  • Problem pools are flagged early enough to fix before afternoon check-ins.
  • Catching a green pool the same day helps avoid fines of up to $500 a day.

Why it matters

  • Pool condition makes or breaks a stay at pool homes.
  • Any operator can reuse existing cameras as daily inspectors and publish the results where the team already works.

Case study 2

Code Violations Caught in a Day, Not Months

A compliance team checks the New Orleans code-enforcement portal for notices against 90 buildings and 293 listings and sends each one to legal.

  • Compliance
Time saved4+ hrssaved per day
Cost of one missed notice
$9,000
in fines, plus legal fees
Before
5+ hours
per day
Now
<1 hour
per day
See the details
  • Searching the city portal property by property took 5+ hours a day.

    An automated checker reviews every property daily and posts flagged, clear or couldn't check.

  • Each violation needed screenshots, the report PDF and a hand-built legal ticket.

    Each new violation becomes an Asana ticket with the evidence attached, duplicates skipped.

  • Notices were found days late, some two to three months late.

    New cases surface within a day.

  • One missed violation cost about $9,000 plus legal fees.

    Status changes go to a person; the automation never drafts legal documents.

The result

~25 hours weekly before → under 5 hours weekly now

  • Saves 20+ hours every week.
  • New cases surface within a day instead of days or months later.

Why it matters

  • Short-term-rental rules are enforced city by city, often through slow portals, and a missed notice gets expensive fast.
  • Any operator in a regulated market can check the portal daily, file tickets automatically and keep decisions with people.

Case study 3

Ledger Review by Exception

Every month, once labour and expenses are posted, accounting reviews the general ledger in Sage Intacct for entries that look wrong, and again for quarterly reports.

  • Finance
Time saved37 hrssaved per monthly review
Ledger lines screened
3,500+
every month, across 39 expense accounts
Before
40 hours
per monthly review
Now
3 hours
per monthly review
See the details
  • Tens of thousands of entries were reviewed by hand, by several people.

    The team's own rubric drives an automation that flags entries that look wrong, totals reconciled first.

  • The review rules lived in a rubric and in people's heads.

    Fixed rules plus judgement-based checks, encoded once.

  • In a ledger that long, a miscoded entry is easy to miss.

    The accountant marks each flag Legit, False Flag or Not Sure, and that sharpens the next run.

The result

~40 hours monthly before → ~3 hours monthly now

  • Saves ~37 hours every month.
  • Only suspicious lines reach a person; accountants still make every correction.

Why it matters

  • Clean books drive owner statements, payouts and tax reporting.
  • Any accounting team can encode its review rubric and let the automation do the first pass.

Case study 4

Pools and Thermostats Without the Truck Roll

Pool teams keep ~77 heated pools warm, clean and running, and maintenance teams handle frequent thermostat complaints, every day.

  • Operations
Time saved4 hrssaved per daily check of all 77 pools
Thermostat fix
90 → 10 min
per issue, handled remotely
Before
4 hours
per daily check, 77 pools
Now
10 min
per daily check, 77 pools
See the details
  • Each pool controller was checked one by one in the Hayward app.

    All 77 pools answered with one question: temperature, heater, pumps, salt, alarms.

  • The weekly pool service schedule was built by hand from occupancy.

    The schedule builds itself from occupancy.

  • Technicians dug through manuals for equipment questions.

    An assistant answers from 67 manufacturer manuals.

  • A thermostat complaint usually meant a 90-minute technician visit.

    Resideo thermostats checked and adjusted remotely, rolling out home by home.

The result

~27 hours weekly before → ~2 hours weekly now

  • Saves ~25 hours every week on pool checks.
  • Failing heaters and open alarms show up across every pool at once.
  • Each thermostat issue fixed remotely saves a 90-minute technician visit, about 6 hours a week once the rollout completes.

Why it matters

  • Pools and heating or cooling drive a large share of guest complaints and call-outs.
  • Any operator can connect its equipment brands to one automation: see everything first, then add control home by home.

Case study 5

From Market Data to Live Prices

Revenue teams review every market weekly, compare against comparable rentals, and turn decisions into price changes in the pricing model.

  • Revenue Management
  • Marketing
Time saved18 minsaved per market lookup
Adoption
Every market
runs its weekly pricing through it, since August
Before
20 min
per lookup
Now
2 min
per lookup
See the details
  • Market data lived in AirDNA's web app; comparables meant manual lookups and exports.

    Ask plain questions and get AirDNA data next to your own booking data.

  • Pricing decisions were logged in Asana, then pasted by hand into the Google Sheets model.

    The automation reads the weekly notes and proposes structured price changes.

  • Sheet rows move often (191 shifted in one week); a paste could land on the wrong property.

    A guarded write path: limited columns, a re-check, preview-then-approve and a full log. Wrong-row writes are blocked by design.

The result

~5 hours weekly before → ~30 minutes weekly now

  • Saves 4+ hours every week on lookups and copy-paste.
  • Wrong-row writes are blocked by design, and every change has an audit trail.
  • Used in 100% of markets every week.

Why it matters

  • Pricing mistakes cost revenue every night they stay live, and good pricing starts with good market data.
  • Any operator can connect market data to its pricing workflow and let people decide while the automation writes and checks.

Case study 5+

Listing Updates Without the Copy-Paste

Listing teams update property details in Guesty daily, including a caption for every photo (10–20+ photos per home, 1–3 homes a day).

  • Marketing
Time saved9 minsaved per photo
Manual steps per listing
90 → 1
one request, then a spot-check
Before
10 min
per photo
Now
<1min
per photo
See the details
  • Open the listing, download each photo, ask a chatbot, fix it, paste it back: ~90 manual steps per listing.

    One request pulls the listing and its photos, writes every caption and saves them to Guesty.

  • 10 to 20+ photos per home, 1 to 3 homes a day.

    The team only spot-checks; captions follow one standard and never invent amenities or bed counts.

The result

~25 hours weekly before → ~1 hour weekly now

  • Saves ~24 hours every week.
  • Captions follow one standard and never invent amenities or bed counts.

Why it matters

  • Listing content is the shop window; captions written to one standard, with no invented amenities, protect it.
  • Any operator with a large photo library can caption and publish in one step and keep people on the spot-check.

Case study 6

Guest Message to Work Order in a Minute

Dispatch teams turn guest-reported problems (air conditioning, plumbing, locks, Wi-Fi) into work orders for technicians across eight markets, every day.

  • Operations
  • Guest Services
  • Procurement
Time saved9 minsaved per work order
Message to work order
~1 min
across all eight markets
Before
10 min
per work order
Now
1 min
per work order
See the details
  • A dispatcher read each Slack post and typed the work order by hand.

    The automation reads the guest conversation and drafts the work order in a consistent format.

  • Reports arrived through many channels, and every handoff was manual.

    A person approves with one click; the work-order link comes back in about a minute.

  • In busy periods, issues sat unnoticed until the guest complained again.

    Recommendations ran side by side with the team first, across all eight markets, then moved to one-click approval.

The result

~17 hours weekly before → ~2 hours weekly now

  • Saves ~15 hours every week.
  • Recommendations covered nearly every maintenance category across all eight markets.

Why it matters

  • Slow dispatch turns a fixable problem into a refund and a bad review.
  • A safe path for any operator: let the automation recommend alongside people, move to one-click approval, then automate.

Case study 7

Outage Radar

Operations leaders in New Orleans need to know when the city's Sewerage & Water Board has open work near a rental: water-main repairs, sewer work, hydrant and street repairs, and planned outages.

  • Operations
  • Compliance
Time saved~3 hrssaved per daily sweep of 90 buildings
Warning time
Days ahead
of a guest finding out, from the city's own data
Before
3 hours
per daily sweep
Now
5 min
per daily sweep
See the details
  • The water board's open work orders sat on a citywide map, unlinked to the listings.

    Every open order within 500 feet of a listing, grouped by severity, posted to Slack.

  • No way to see what had changed since the last check.

    Each run is compared with the last: only new, resolved and changed orders show.

  • Guests found out the hard way: no water, a dug-up street, blocked parking.

    Operations leadership sees it in the daily check-in, days ahead.

The result

~15 hours weekly before → ~30 minutes weekly now

  • Saves over 14 hours every week: a manual sweep of the city map against ~90 buildings takes about 2 minutes a building.
  • Its output feeds operations leadership's daily check-in.

Why it matters

  • Water outages, sewer and street works and road closures near a rental lead to complaints and refunds, and they're often visible in public data days ahead.
  • Any operator can match public city data against its portfolio and alert only on changes.

Case study 8

The Overnight Party Watch

Rentals with pool and patio cameras need someone keeping an eye on them overnight, when parties happen.

  • Operations
  • Compliance
Time saved~2 hrssaved per night
Fine avoided per party
$1,000
for about $50 a month to run
Before
2 hours
per night
Now
15 min
per night
See the details
  • Cameras only helped if someone was watching them, all night.

    Every 10 minutes, 9 PM to 5 AM, the automation counts the people in each pool area.

  • Parties came to light the next morning, via a neighbour or a city notice.

    A photo alert reaches the team and the homeowner while it's happening, street and neighbours blacked out.

  • One party can mean ~$1,000 in fines, plus damage.

    Alerts jump to high priority when the crowd grows or a noise sensor fires.

  • No proof the home was being watched.

    Every check is logged, quiet nights included.

The result

~14 hours weekly before → ~2 hours weekly now

  • Saves ~12 hours every week of overnight spot-checking.
  • 48 checks per property per night instead of whenever someone has a minute.
  • Costs about $50 a month; one avoided $1,000 fine covers about 20 months.

Why it matters

  • Parties are one of the most expensive things that can happen in a short-term rental.
  • Any operator with cameras can turn them into an early warning, with privacy masking built in.

Case study 9

One Feed for Every Noise Alert

Operations teams watch noise sensors in every rental to catch disturbances early, every night.

  • Operations
  • Guest Services
  • Compliance
Time saved70 minsaved per day
Fine avoided per incident
$1,000
the typical noise fine
Before
90 min
per day
Now
20 min
per day
See the details
  • Two sensor brands, two apps, two alert styles.

    Every alert from both brands in one Slack channel, one format.

  • Staff matched each alert to a guest by hand.

    Alerts name the property, room and city and log to the booking in Guesty automatically.

  • Dead batteries and offline sensors went unnoticed.

    Low batteries and dropped sensors go straight to the local team.

  • A missed complaint can mean a city violation and around $1,000 in fines.

    Alerts escalate yellow → orange → red, and anyone can ask "any disturbances this week?"

The result

~10 hours weekly before → ~2 hours weekly now

  • Saves ~8 hours every week.
  • Sensor outages caught the same day.
  • Each incident handled early can avoid around $1,000 in fines.

Why it matters

  • Noise is the top cause of neighbour complaints for short-term rentals.
  • Any operator with more than one sensor brand can pull every alert into one place and tie it to the booking.

Case study 10

Finance Answers in Plain English

Finance leaders regularly need P&L views, cash positions, AP aging and vendor spend across ~190 legal entities.

  • Finance
Time saved55 minsaved per question
Entities covered
~190
answered in plain English
Before
1 hour
per question
Now
5 min
per question
See the details
  • Every question meant pulling Sage reports and stitching spreadsheets.

    Ask in plain English ("cash by entity", "AP over 60 days") and get answers built from the ledger.

  • Saved Sage reports aren't available outside Sage, so views were rebuilt by hand.

    Account groupings mapped once, so every answer uses the same definitions.

  • Leadership questions queued behind month-end work.

    Answered the same day, across ~190 entities.

The result

~12 hours weekly before → ~2 hours weekly now

  • Saves 10+ hours every week across the finance team.
  • Leadership questions get answered the same day.

Why it matters

  • Multi-entity rental portfolios live and die on fast, trustworthy numbers.
  • Any operator can put a plain-English layer on its accounting system.

Case study 11

At-Risk Guest Watch

Guests who had a problem stay a review risk until their review window closes. Several team members check each of them three times a day, every working day.

  • Guest Services
Time saved40 minsaved per sweep, 3 a day
Checks a day
3x
every at-risk guest, every time
Before
50 min
per sweep
Now
10 min
per sweep
See the details
  • Several people checked every at-risk guest three times a day, by hand.

    Three times a day, the automation reads each guest's messages, calls and Airbnb/Vrbo activity.

  • Hours of clicking, whether or not anything had changed.

    The team gets a Slack alert only when something happened.

  • The watchlist was a saved report with no alerts.

    The watchlist builds itself from the escalation records; every guest is checked on every run.

The result

~12 hours weekly before → ~2 hours weekly now

  • Saves ~10 hours every week, growing with the size of the watchlist.
  • Every at-risk guest is checked on every run, however busy the team is.

Why it matters

  • Escalated guests are where bad reviews come from, and reviews drive ranking and bookings.
  • Any "check this list several times a day" job can become a scheduled scan that only alerts on exceptions.

Case study 12

Every Review Caught, Scored and Ready to Answer

Guest-services teams track review scores daily across Airbnb and Vrbo and answer every new review, especially low ones.

  • Guest Services
  • Marketing
Time saved75 minsaved per day
Low reviews flagged
Same day
with a reply already drafted
Before
90 min
per day
Now
15 min
per day
See the details
  • A team lead built the daily review brief by hand.

    A daily Slack report: score, counts, sub-4-star reviews, score by market.

  • An admin copied low reviews from each site into Asana every day.

    New Airbnb and Vrbo reviews become Asana tickets automatically, duplicates skipped.

  • Replies were drafted once a week.

    Each ticket arrives with a suggested reply for a person to edit and post, the same day.

The result

~10 hours weekly before → ~2 hours weekly now

  • Saves ~8 hours every week.
  • Low reviews are flagged the same day, with a draft reply ready.

Why it matters

  • Review score is one of the biggest drivers of ranking and revenue.
  • Any operator on several booking sites can centralise reviews, flag the bad ones daily and pre-draft responses.

Case study 13

Eight Systems, One Property Fact Sheet

After each monthly close, finance builds a fact sheet for every property: how it earned, what it cost, what broke and what's coming.

  • Finance
Time saved~2 hrssaved per property, per month
Systems searched
8 → 1
one sheet per property
Before
2 hours
per property
Now
15 min
per property
See the details
  • An analyst searched eight systems separately for each property.

    The automation gathers finance, reservation, maintenance and internal context into one fact sheet.

  • Each property took about 2 hours to piece together.

    Finance reviews the sheet in ~15 minutes and decides which issues are real.

The result

~2 hours per property before → ~15 minutes now

  • Saves ~1.75 hours per property every month.
  • For 20 properties that's ~40 hours → ~5 hours a month.

Why it matters

  • Owners and leadership want one clear picture per property, not eight systems.
  • Any operator can turn a cross-system monthly review into a one-page summary.

Case study 14

The Repeat-Stay Playbook

Sales needs to know which past guests are worth pursuing for repeat stays, starting with the biggest week of the year in New Orleans: Mardi Gras.

  • Sales
  • Marketing
Time saved8 hrssaved per campaign plan
Return rate
10%
of past guests contacted came back and booked
Before
10 hours
per campaign plan
Now
2 hours
per campaign plan
See the details
  • Guest history sat as individual reservations: no view of who came back, spent the most or referred others.

    A profile of every past guest: spend, stays, reviews, referrals, trip purpose.

  • Campaign plans were built on gut feel and a hand-pulled list; everyone got the same message.

    Guests ranked by likelihood to rebook, with the trends behind it: markets, seasons, guest types.

  • The signals that predict a repeat stay sat in different systems.

    One query of the data warehouse; sales plans the campaign, starting with Mardi Gras, and reviews every message.

The result

~10 hours per campaign plan before → ~2 hours now

  • Saves ~8 hours on every campaign plan.
  • Outreach goes to the guests most likely to book, with the reason attached.
  • 10% of the past guests contacted came back and booked.

Why it matters

  • Repeat guests are the cheapest bookings an operator will ever get, and the data to find them is already in the booking history.
  • Any operator can profile past guests from its own records and plan repeat-sales campaigns around the ones most likely to return.

Case study 15

Timesheet Errors Flagged Before Payroll

Every day, a labour analyst checks the previous day's time entries in Rippling against job codes and billable locations.

  • Finance
  • HR
Time saved70 minsaved per day
Caught
Before payroll
every mismatched entry
Before
90 min
per day
Now
20 min
per day
See the details
  • Each entry was cross-checked by hand from an Excel export: job code, shift, location, hours.

    The daily export runs through an automation that flags any mismatch.

  • A weekly billable-hours review sat on top of the daily checks.

    The analyst reviews only the flagged lines.

  • Mismatches ended up in payroll and property costs.

    Labour costs land on the right property before payroll runs.

The result

~8 hours weekly before → ~2 hours weekly now

  • Saves ~6 hours every week.
  • Labour costs land on the right property before payroll runs.

Why it matters

  • Labour is one of the largest costs in a rental operation, and miscoded hours distort property P&Ls.
  • Any operator can flag timesheet mismatches automatically and review exceptions only.

Case study 16

Every Lockout and Wi-Fi Outage in One Daily Report

Guest teams need to know every day which door locks are failing and where guests are getting locked out or losing Wi-Fi.

  • Guest Services
  • Operations
Time saved40 minsaved per day
Coverage
24 hours
every lockout and Wi-Fi issue, across every channel
Before
45 min
per day
Now
5 min
per day
See the details
  • Lock alerts arrived as a daily email someone had to open and read.

    A Lock Health Report built automatically from Guesty's alerts.

  • Lockout and Wi-Fi complaints were scattered across many Slack channels, uncounted.

    A Daily Issue Report counts them across every channel for the last 24 hours.

  • No way to see a repeat problem at a property.

    One post every evening at 6 PM; repeat problems show up as a trend.

The result

~5 hours weekly before → ~30 minutes weekly now

  • Saves 4+ hours every week.
  • Repeat problems at a property show up as a trend, not one-off complaints.

Why it matters

  • A guest who can't get in, or get online, is the start of a bad review.
  • Any operator can turn alert emails and scattered chat complaints into one daily digest.

Case study 17

HR Admin on Autopilot

HR handles the same communications and calculations every week and every quarter.

  • HR
  • Compliance
Time saved50 minsaved per new-hire announcement
Before
1 hour
per announcement
Now
10 min
per announcement
See the details
  • Quarterly exchange-rate true-ups were calculated by hand, one contractor at a time.

    An interactive calculator; contractors can check their own numbers.

  • The weekly new-hire announcement was drafted from scratch.

    Drafted automatically, every week.

  • Employment-law changes were checked location by location.

    Updates for every operating location, posted to Slack weekly.

The result

~5 hours weekly before → under 1 hour weekly now

  • Saves 4+ hours every week.
  • Fewer pay questions reach HR, and every contractor gets the same calculation.

Why it matters

  • Distributed teams need pay and compliance updates that are fast, consistent and easy to check.
  • Any HR team can turn its recurring policies and announcements into self-serve tools.

Case study 18

On-Brand Writing for Every Team

Every team writes guest messages, emails, Slack updates and memos daily, and more and more of it starts as an AI draft.

  • Guest Services
  • Marketing
  • Sales
  • HR
Time saved8 minsaved per draft, per person
Who uses it
Every team
guest services, sales, HR, marketing
Before
10 min
per draft
Now
2 min
per draft
See the details
  • AI drafts read as robotic and generic.

    One writing tool, built from the company's own emails, Slack messages and memos, rewrites any draft in the sending team's voice.

  • Staff rewrote drafts by hand, which ate the time the automation was meant to save.

    A rewrite takes ~2 minutes instead of ~10.

  • One generic "sound human" prompt fit nobody.

    Each department added its own guidelines; strict rules: no made-up facts, nothing dropped, no filler.

The result

~4 hours weekly before → ~50 minutes weekly now, per person

  • Saves 3+ hours every week for each person who writes with AI.
  • A rewrite takes ~2 minutes instead of ~10.

Why it matters

  • In hospitality, tone is part of the product.
  • Any operator can turn its best writing into house-style rules and run every AI draft through them.

Case study 19

Every Ad Dollar Traced to a Booking

Marketing runs a paid-search test with a fixed budget ($3,000) and needs to know weekly whether spend turns into bookings.

  • Marketing
  • Sales
Time saved2.5 hrssaved per weekly report
Spend found misdirected
38%
going to people already searching the brand
Before
3 hours
per weekly report
Now
30 min
per weekly report
See the details
  • Ad spend and website activity lived in separate tools; no way to tie a booking to a keyword.

    Google Ads spend lands in the data warehouse daily, and the site sends booking and inquiry events.

  • Google Ads optimised for phone calls because the site sent no booking events.

    First attributed paid booking: $2,665, traced to a single keyword.

  • Every report meant manual exports and spreadsheet joins.

    Weekly tables build themselves; in 10 days they showed ~38% of spend going to brand searches.

The result

~3 hours weekly before → ~30 minutes weekly now

  • Saves 2+ hours every week.
  • In the first 10 days it showed ~38% of spend going to people already searching for the brand.
  • First attributed paid booking: $2,665, traced to a single keyword.

Why it matters

  • Direct bookings are the highest-margin bookings, yet most operators can't see which ads produce them.
  • Any operator can send spend and conversions into one place and get the weekly read automatically.

Case study 20

Branded Memos in Two Minutes

Leadership and teams send formal memos on company letterhead for policy changes, announcements and updates.

  • HR
  • Finance
  • Operations
Time saved25 minsaved per memo
Before
30 min
per memo
Now
5 min
per memo
See the details
  • Each memo was formatted by hand: letterhead, layout, headings, signature block.

    Describe the memo in plain words and get a finished, on-brand memo.

  • Layouts varied from person to person, with back-and-forth before sending.

    Every memo looks the same, whoever writes it; it pairs with the writing tool for voice.

The result

~3 hours weekly before → ~30 minutes weekly now

  • Saves 2+ hours every week across the teams that send memos.
  • Every memo looks the same, whoever writes it.

Why it matters

  • Consistent, professional communication builds trust with staff, owners and partners.
  • Any company can turn its document template into a one-step generator.

Case study 21

Payment Plans: Automating the Workaround

Sales offers installment plans on Vrbo and direct bookings (up to three installments, 50% up front) and keeps 50–80 active plans on track.

  • Sales
  • Finance
Time saved~3 hrssaved per review, twice a month
Changes to the booking system
Zero
the workaround stays; the report sits on top
Before
3 hours
per review
Now
15 min
per review
See the details
  • No payment-plan feature, so a workaround: custom fields and a saved view with no filters.

    The automation reads the same fields and produces an on-demand report for any time frame.

  • Twice a month, one person worked the whole list by hand; failed charges didn't surface.

    Who's on track, who's behind, who needs a follow-up and how to reach them.

  • Replacing the workaround would mean retraining everyone and migrating years of records.

    Nothing in Guesty changed, and nobody had to learn a new process.

The result

~6 hours monthly before → ~30 minutes monthly now

  • Saves 5+ hours every month.
  • One run found 11 reservations with money outstanding, including a final installment 100+ days overdue.

Why it matters

  • Teams rarely welcome a new system, but they do welcome their old process running itself.
  • The best automation targets are often the processes everyone knows are clumsy and nobody can afford to replace. Any operator can put a clean report on top of a workaround instead of rebuilding it.

Case study 22

Investor Updates Drafted from the Numbers

Each month, finance prepares written commentary for investor and ownership reporting.

  • Finance
Time saved6 hrssaved per report
Structure
1
format for every investor update
Before
8 hours
per report
Now
2 hours
per report
See the details
  • Someone read the numbers, dug through context and wrote the story by hand.

    The automation drafts a structured narrative from the finance and operating data.

  • Issues had to be sorted into real faults versus timing or coding noise.

    Issues sorted by type; confirmed faults signed off by a person.

The result

~8 hours monthly before → ~2 hours monthly now

  • Saves ~6 hours every month.
  • Every report follows the same structure.

Why it matters

  • Owners and investors judge an operator by how clearly it explains its numbers.
  • Any finance team can draft reporting commentary automatically and keep sign-off with people.

Case study 23

Card Spend, Sorted Automatically

After each monthly close, finance reviews company card spending across the business.

  • Finance
Time saved5 hrssaved per monthly close
Ready
Day 1
after close, sorted by vendor
Before
6 hours
per close
Now
1 hour
per close
See the details
  • Merchant names arrived messy; the same vendor showed up many ways.

    Merchant names cleaned up automatically.

  • Every transaction was categorised by hand, then reconciled to source totals.

    Every transaction categorised and reconciled; the summary is ready right after close.

The result

~6 hours monthly before → ~1 hour monthly now

  • Saves ~5 hours every month.
  • Spending by category and vendor is ready right after close.

Why it matters

  • Card spend is where small leaks add up across a large portfolio.
  • Any finance team can automate cleanup and categorisation and keep people on the review.

Case study 24

Month-End Folders That Build Themselves

Every month, finance sets up a fresh folder for each property and copies over the prior month's templates.

  • Finance
Time saved3 hrssaved per monthly close
Folders made by hand
0
close starts with everything in place
Before
3 hours
per close
Now
0
per close
See the details
  • Folders and templates were created by hand, property by property, across ~190 entities.

    A scheduled automation creates every monthly folder and copies the right templates.

  • Missing or misnamed folders slowed down close.

    Close starts with everything in place: zero folders made by hand.

The result

~3 hours monthly before → zero now

  • Saves ~3 hours every month.
  • Close starts with everything in place.

Why it matters

  • Small admin chores add up fast at portfolio scale.
  • Any team with a monthly setup routine can schedule it away.

Hours are the team's own before-and-after figures for each workflow. Fine amounts are the city's published maximums for the markets concerned.